HYPNOTIK FX Audio Reactive Pixel Controller (Wi-Fi)
May 12, 2026
Section: Basic Hardware Setup | Product: HYP-FX-SC-DIG-M-15A | Model: Hypnotik-FX-SC-DIG-M-15A
Overview
The Hypnotik FX Audio Reactive Pixel Controller (DIG-ALED) is the controller used with all Vibe Pixel digitally addressable LED strips. It drives individually addressable LED pixels, enabling per-pixel colour control and complex audio-reactive lighting effects.
Key Features
| Feature | Detail |
|---|---|
| LED Output | Digitally addressable (WS2812B, SK6812, APA102 compatible) |
| Audio Reactive | Built-in microphone for real-time audio-reactive effects |
| Connectivity | Wi-Fi (2.4 GHz) |
| Control | App control, PC control, Remote control (ESP-NOW) |
| Smart Home | Control4 SDDP certified driver |
| Updates | OTA and manual firmware upgradability |
| Wiring | Easy flip-up tab terminals + barrel jack input |
| Warranty | 3 Years |
| SKU | HYP-FX-SC-DIG-M-15A |
| UPC | 659359721700 |
Physical Connections
Power Input
| Connection | Method |
|---|---|
| Barrel Jack | Plug in the included 24V DC power supply |
| Flip Tab Terminals | Connect bare wire from 24V DC power supply |
See:
LED Output Terminals
The controller has output terminals for:
- +24 V — LED strip power positive
- GND — LED strip power negative
- DATA — Digital data signal to the strip
These connect to the input end of the Vibe Pixel LED strip.
Microphone
The built-in microphone is located on the PCB and captures ambient audio for audio-reactive effects. No external connection is required.
Push Button
One physical push button on the controller body. See Using the Push Button for gesture details.
USB / Programming Port
A USB port is available for firmware flashing. Under normal operation, firmware is updated via OTA — the USB port is for factory use.
Compatible LED Strips
| Strip | SKU | Type |
|---|---|---|
| Vibe Pixel COB 784LPM RGB + 2700K | HYP-FX-COB-784-RGBW | Zero-Dot, Color + White |
| Vibe Pixel COB 720LPM RGB | HYP-FX-COB-720-RGB | Zero-Dot, Color |
| Vibe Pixel 60LPM RGB | HYP-FX-60-RGB | Standard Color |
| Vibe Pixel 144LPM RGB | HYP-FX-144-RGB | Fluid Color |
Firmware Settings (After Wiring)
After connecting a Vibe Pixel strip, open the web UI and go to Settings → LED Preferences:
| Setting | Value |
|---|---|
| LED Type | WS2812B / SK6812 (see specific strip tutorial) |
| Data Pin | GPIO 13 (default) |
| Color Order | GRB or GRBW (see specific strip tutorial) |
| LED Count | Number of pixels in your strip |
Audio Reactive Setup
The built-in microphone is active by default. To configure audio sensitivity:
- Go to Settings → Audio Reactive.
- Set Microphone Type to Generic Analog.
- Adjust Squelch and Gain to match your environment.
See Settings — Audio Reactive for full details.
