Hypnotik FX - Setting up Sync

1. Network Check
2. Choose Your "Master" Controller
3. Access the Navigation Menu
4. Enable Sync
5. Unified Control

1. Network Check

• Ensure two or more controllers are powered on and connected to the same Wi-Fi network.
• Open the Hypnotik App and verify that all controllers appear in your device list.

2. Choose Your "Master" Controller

• From the device list, tap the specific Controller you want to use as the "Lead."
• Note: This is the device that will dictate the colors and patterns for all others.

3. Access the Navigation Menu

• Tap the Three-Line Navigation Icon (Hamburger menu) located in the Top Left corner of the screen.

4. Enable Sync

• Select the Sync option from the menu list.
• Confirm the Sync: Look for the Sync Icon (usually a chain link or circular arrows) to appear in these three locations:
  • At the top of the screen, next to the Wi-Fi icon and IP Address.
  • On the Home Page.
  • In the Device List next to the active controller.

5. Unified Control

Now, any changes you make to Effects, Brightness, or Colors on this controller will automatically reflect across all other connected devices on the network.